No products in the cart.
THE KIT INCLUDES
CREATIVE FUNCTIONAL BUTTONS
You can have different vaping experience by the irregular Power button and UP/DOWN button that are filled with creativity.
DELRIN DRIP TIP
The delrin drip tip will bring increased airflow and provide you with powerful draw effects.
ADJUSTABLE AIRFLOW SYSTEM
Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of atomizer.
TFV8 BIG BABY BIG FAMILY
TOP REFILL SYSTEM
Top refill system makes filling as easy as it gets.
Leak proof e-liquid slot can significantly solve leaking problem.
HOW TO BUILD THE RBA
1. Before starting, make sure your hands are clean.
2. Take RBA deck apart.
3. Install and position the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all is in place, make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base. 4. Cut the excess ends of the wire off.
5. Cut a strip of cotton and make sure it’s not too much and not too little.
6. Insert the cotton and placing it in the middle of the coil.
7. Cut the cotton at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.